Here you will find over 100,000 items of militaria for sale on-line |
||
You have most likely reached this page from a search engine. The item you are searching for can be found on the Why not click on the Enter button below to see the other Dealers on MilitariaMart |
||
The
following items can be found on the Endici Militaria website , with full descriptions, photographs and prices. |
|
10th Lanarkshire Rifle Volunteers (Glasgow Highlanders) Victorian GlengarryBadge Made from white metal and in good condition with toned dark holding lugs undamaged and intact. Measures 74mm high.Beautiful example. 110th (Stratford) Infantry Battalion CEF Cap and Collar Badges Set. Made by Service Supply Rochester from pickled brass and in good condition (one collar has had lugs very well repaired or replaced). 11th Railway Troops Battalion CEF WW1 Collar Badge (Hicks) Made by Hicks and Sons of London from bronzeand red enamel and in good condition with holding lugs undamaged and intact. Measures 30mm high. 121st (Western Irish) Infantry Battalion WW1 Collar Badge. Made from bronze or bronzed brass and in good condition with holding lugs undamaged and intact. Measures 32mm high. 122nd ( Muskoka) Infantry Battalion Scarce Type 1 Collar Badge. Made from bronze nd in good condition with holding lugs undamaged and intact. Measures 32mm high. 123rd (Toronto) Infantry CEF WW1 Collar Badge. Made from brass/gilded metal and in good condition with holding lugs undamaged and intact. Measures 30mm high.Measures 30 mms. 124th Governor General\'s Bodyguard) Battalion CEF WW1 Collar Badge. Made from bronze or bronzed brass and in good condition with holding lugs undamaged and intact. Measures 38mm high. 12th (X11) Royal Lancers Victorian Cap Badge Made from bi-metal and in good condition with central brazing hole and holding lugs undamaged.Excellent example. 12th Lancers Cap/Lapel Badge Made from bi-metal and in good condition with holding lugs undamaged and intact. Measures 44mm high. 12th Nelson Infantry New Zealand Cap Badge OSD Bronze by J R Gaunt London 12th Railway Troops Battalion CEF WW1 Collar Badge. Made from brass/gilded metal and enamel (faded) and in good condition with holding lugs undamaged and intact. Measures 36mm high. 138th (Edmonton) Infantry Battalion CEF Cap Badge (Jackson) By Jackson Bros - stamped to the rear.
Very good example. Measures 44mm high. 13th Hussars - Large Officer\'s Brooched Badge. Silvered & Enamel XIII An early unusual brooched 13th Hussars enamel and silvered brooch badge. 42 mms H. Some losses to the enamel. 141st (Rainy River District) Infantry Battalion CEF WW1 Collar Badge. Made from brass and in good condition with brass holding lugs undamaged and intact. Measures 28mm high. 14th Kings Hussars (1915-29) Cap Badge. Made from gilded metal and in good condition with slider undamaged and intact. 14th Kings Hussars (Pre 1915) Cap Badge. made from bi-metal and in good condition with brazing holes and holding lugs undamaged and intact. Measures 42mm high. 14th Kings Hussars Hallmarked (1891) Silver 2 Part NCO's Arm Badge. Made in two parts from Silver in Birmingham in 1891 and in good condition with holding loops undamaged and intact.Cant read makers but it ends in &W. 14th King\'s Hussars Collar Badge - 22 mms H. King\'s Crown 156th (Leeds&Grenville) Infantry Battalion CEF Non Voided Canadian CEF Cap Badge. Made from brass/gilded metal and in good condition with holding lugs undamaged and intact. Measures 40mm high. 15th Kings Hussars Victorian Cap Badge. Made from bi-metal and in good condition with holding lugs undamaged and intact. Measures 42mm high. 15th Kings Hussars Victorian Cap Badge. Made from bi-metal and in good condition with holding lugs undamaged and intact. Measures 42mm high. 15th The King\'s Hussars Matching Victorian Collar Badges. Made from bi-metal and in good condition with holding lugs undamaged and intact. Each one measures 32mm high. 16th Queens Lancers Victorian Cap Badge. Made from bi-metal and in good condition, has five brazing holes with holding lugs undamaged and intact. Measures 42mm high. 16th Queen\'s Lancers Victorian Cap Badge. Made from bi-metal and in good condition with holding lugs undamaged and intact. Measures 42mm high. 16th Queen\'s Lancers Victorian Cap Badge. Made from bi-metal and in good condition with holding lugs undamaged and intact. Measures 42mm high. 16th The Queen\'s Lancers K.C. Collar Badge A lovely example with brazing holes to the rear.
32 mms H. 176th (Niagra Rangers) Infantry Battalion CEF Cap Badge. Made from coppered brass/gilded metal and in good condition with brass holding lugs undamaged and intact. Measures 50mm high. 18th (Ontario) Infantry Battalion CEF Cap Badge Made from coppered metal and in good condition with holding lugs undamaged and intact. Measures 52mm high. 1st Admin Battalion Cornwall Rifle Volunteers (Pre 1881) Blackened Glengarry Badge. Made from blackened metal, is in good condition with holding lugs undamaged and intact. Measures 50mm high. 1st Canadian Pioneers CEF Collar Badge Made from bronze and in good condition with holding lugs undamaged and intact. Measures 30mm high. 1st Depot Battalion (Nova Scotia) CEF WW1 Collar Badge, (possibly Officers). Made from brass/ gilded metal and in good condition with holding lugs undamaged and intact. Measures 32mm high. 1st Royal Dragoons (Pre 1913) Shoulder Title (Narborough).. Made by F.Narborough of Birmingham from brass and in good condition with original lugs intact. Measures 32mm high. 1st Royal Dragoons Victorian NCO's Hallmarked (1897) Silver Arm Badge. Made in Birmingham in 1897 by Bent&Parker from Silver and in good condition with 3 silver holding lugs undamaged and intact. Measures 60mm high. 1st Volunteer Battalion Lancashire Fusiliers Volunteers Victorian Fur Cap Grenade. Made from white metal and in good condition with holding lugs undamaged and intact. Measures 100 mm high. 2 BEDFORD CCF & 1 FIRE CADETS CLOTH SHOULDER TITLES 2 CCF CLOTH SHOULDER TITLES - DARTFORD GRAMMAR SCHOOL 2 CCF CLOTH SHOULDER TITLES - Presentation & Prices College 2 CCF CLOTH SHOULDER TITLES - Worksop College & Worthing High School 2 Royal Dublin Fusiliers Collar Badges 40 mms h.
Elephant and tiger facing in the same direction.
Good examples 2 Variations POCKLINGTON SCHOOL CCF CLOTH SHOULDER TITLES Two variations. 20th (Lancashire Fusiliers) Regiment of Foot Officers Victorian Helmet Plate. This is an original and fine Officers Helmet Plate of the 20th (Lancashire Fusiliers) Regiment of Foot in use from 1881 ubtil 1902.It is made from gilt and white silvered metal and is in very good condition with holding lugs undamaged and intact.Measures 126mm high.
(From the Captain Allan Marshall Collection). 20th Hussars Victorian Cap Badge. Made from gilded metal and in very good condition with holding lugs undamaged and intact. Measures 42mm high. 20th Middlesex (Artists) Rifle Volunteers (1880-1908) Scarce Helmet Plate. Made from blackened brass and in good condition with all three holding lugs undamaged and intact. Measures 110mm high. 211th (Alberta Americans) Infantry Battalion CEF Cap Badge. Made from pickled brass and in good condition with original brass lugs intact. Measures 44mm high. 216th (Toronto)Bantams Infantry Battalion CEF Cap Badge (Ellis). Made from coppered brass by Ellis Bros Toronto. Measures 44mm high. 21st Lancers Victorian Button - by Jennens & Co 20 mms diameter. 22nd Dragoons WW2 Cap Badge (Firmin). Made by Firmin of London from white metal and in good condition with slider undamaged and intact. 23rd Hussars WW2 Cap Badge Made from bi-metal and in good condition with holding lugs undamaged and intact. 241st (Canadian Scottish Borderers) Battalion CEF Cap Badge (Ellis). Made by Ellis Bros. of Toronto from bronze and in good condition with holding lugs undamaged and intact. Measures 56mm high. 27th Punjabis Officers Shoulder Belt Plate (1903-1922). Made from unmarked Silver and in good condition with screwpost fittings and nuts undamaged and intact. Measures 74mm high. 28th (Artist\'s) Battalion County of London Cap Badge Made from white metal and in good condition with slider undamaged and intact. 28th (North Gloucestershire) Regiment of Foot Victorian Glengarry Badge Made from brass/gilded metal and in good condition with holding lugs undamaged. Measures 78mm high.Excellent example. 2nd (Eastern Ontario) Battalion CEF Officers Hallmarked (1916) Cap Badge. Made in 1916 by Goldsmith&Silversmiths Company of London from Silver and in good condition with holding lugs undamaged and intact. Measures 52mm high. 2nd (Eastern Ontario) Infantry Battalion WW1 CEF Collar Badge, Made from bronze or bronzed brass and in good condition with holding lugs undamaged and intact. Measures 34mm high. 2nd (Glasgow) Volunteer Battalion Highland Light Infantry Cap Badge. Made from white metal and in good condition with holding lugs undamaged and intact. Measures 58mm high. 2nd Battalion 70th Burma Rifles Hallmarked (1919) Officers Silver Cap Badge. Made in Birmingham in 1919 by J&Co. (Jennens) of Silver and in good condition with holding lugs undamaged and intact. Measures 40mm high. 2nd Canadian Pioneers CEF Collar Badge. Made from bronze or bronzed brass and in good condition with holding lugs undamaged and intact. Measures 34mm high. 2nd Depot B\'n British Columbia CEF Collar Badge.(O B Allan). Made by O.B.Allan from bronze and in good condition with holding lugs undamaged and intact. Measures 36mm high. 2nd Skilled Railway Employees CEF WW1 Collar Badge. Made from brass/gilded metal and in good condition with holding lugs undamaged and intact. Measures 36mm high. 2nd Volunteer Battalion Border Regiment (Pre 1908) Glengarry Badge. Made from white metal and in good condition with toned dark holding lugs undamaged and intact. Measures 66mm high. 2nd Volunteer Battalion Manchester Regiment Victorian Senior NCO\'s Glengarry Badge (1888-1896) Made from white metal and in very good condition with holding lugs undamaged and intact. Measures 72mm high. 3 The Royal Scots Silver-plated buttons by Stillwell. 25 mms diameter. 3 VARIATIONS - Bedford Grammar School CCF CLOTH SHOULDER TITLE 30th Punjabis WW1 Officers Pagri Badge. Made from gilded metal and in good conditi
on with stout pin and clasp undamaged and intact. Measures 64mm high. 39th (Dorsetshire) Regiment of Foot Victorian Glengarry badge This is an original Glengarry Cap Badge of the 39th Dorsetshire Regiment of Foot. It is made from brass/gilded metal and is in good condition with brass holding lugs undamaged and intact. Measures 64mm high.
B1 Website Box 2. 43rd (Monmouthshire) Regiment of Foot Gilt Button 19 mms diameter. by Jennens London 45th Nottinghamshire Regiment of Foot Glengarry Cap Badge of the3 This is an original Glengarry Cap Badge of the 45th Nottinghamshire Regiment of Foot. It is made from brass/gilded metal and is in good condition with brass holding lugs undamaged and intact. Measures 70mm high.
B1 Website Box 2. 46th (South Saskatchewan) Inf, Bn. Cap&Collar Set (Service Supply Rochester) Made by Service Supply Rochester from brass/gilded metal and in good condition with all holding lugs undamaged and intact. 48th (Highlanders, Victoria) Infantry Battalion CEF WW1 Collar Badge. Made from bronze or bronzed brass and in good condition with holding lugs undamaged and intact. Measures 34mm high. 4th Pioneer (Labour) Battalion CEF Collar Badge Made from bi-metal and in good condition with holding lugs undamaged and intact. Measures34mm high. 4th Pioneerss Battalion CEF WW1 Collar Badge. Made from pickled brass and in good condition with one holding coming away slightly from badge. Measures 30mm high. 4th QUEEN\'S OWN HUSSARS CAP BADGE King\'s crown - with brazing holes to the rear scroll.
A very good example. 4th Railway Troops CEF WW1 Collar Badge. Made by Gaunt of London from brass/gilded metal and in good condition with holding lugs undamaged and intact. Measures 30mm high. 4th Volunteer Battalion Royal West Surrey Helmet Plate. Made from brass/gilded metal and in goods condition with one holding lug absent. Measures 90mm high.
Sent 8/07/22 Riley. 55th (Westmorland) Regiment of Foot Victorian Glengarry Badge. Made from brass/gilded metal and in good condition with brass holding lugs undamaged and intact. Measures 64mm high. 59th (2nd Nottinghamshire) Foot Victorian Glengarry Cap Badge. Made from brass/gilded metal and in good condition with brass holding lugs undamaged and intact. Measures 65mm high. 5th (Royal Irish) Lancers Cap Badge Made from bi-metal, has brazing holes and in good condition with slider undamaged and intact. 5th (Royal Irish) Lancers Hallmarked Birmingham (1896) Silver NCO's Arm Badge. Made of hollow back construction in Silver by F&S Ltd. of Birmingham in 1896. Hallmarked front and back and in good condition. Measures 64mm (2.5 inches) high. 5th Battalion The F.F.Regiment Plaid Brooch. Made from white metal and in good condition with stout pin and clasp undamaged and intact. Measures 96mm in Diameter. 5th Dragoon Guards Victorian Collar Badges (1896-1901). A good scarce die-stamped pair. 5th Pioneer Battalion CEF Collar Badge. Made from bronze or bronzed brass and in good condition with holding lugs undamaged and intact. Measures 30mm high. 60th (Montreal) Infantry Battalion CEF WW1 Collar Badge. Made from bronze or bronzed brass and in good condition with holding lugs undamaged and intact. Measures 30mm high. 61st (South Gloucestershire) Regiment of Foot Victorian Glengarry Badge Made from brass and in good condition with holding lugs undamaged.Measures 78mm high.Excellent example. 61st (Winnipeg) Infantry Battalion WW1 Collar Badge. Made from pickled brass and in good condition with holding lugs undamaged and intact. Measures 34mm high. 69 PUNJABIS Indian Shoulder Title Serving during World War I in the Middle East on the Suez Canal and in the Gallipoli Campaign, withdrawn from Gallipoli along with the 89th Punjabis and sent to the Western Front in France in 1915.
In the re-organisation of the Indian Army in 1922 they became the 2nd Battalion, 2nd Punjab Regiment.
A good example. 69th (Montreal) Infantry Battalion CEF WW1 Collar Badge, Made from bronze or bronzed brass and in good condition with holding lugs undamaged and intact. Measures 32mm high. 6th (Inniskilling) Dragoons WW1 Cap Badge Made from bi-metal and in very good condition with 2 brazing holes to the rear.Measures 44mm high. 6th Dragoon Guards (Carabiniers) Victorian Cap Badge. Made from bi-metal and in good condition with holding lugs undamaged and intact. Measures 42mm high. 6th Dragoons (Carabiniers) Victorian Cap Badge. Made from bi-metal, has three brazing holes and is in good condition with holding lugs undamaged and intact. Measures 40mm high. 6th Infantry Draft CEF WW1 Collar Badge. Made from bronze or bronzed brass and in good condition with holding lugs undamaged and intact. Measures 34mm high. 70th (London) Infantry Battalion CEF Collar Badge.O Made by Inglis frompickled brass and in good condition with holding lugs undamaged and intact. Measures 34mm high. 74th (Toronto) Infantry Battalion CEF WW1 Collar Badge. Made by Eliis & Co in 1915 from brass/gilded metal and in good condition with holding lugs undamaged and intact. Measures 32mm high. 74th Highlander\'s Regiment of Foot Silver Open backed Button 16 mms diameter.
Marked Firmin & Sons Ld London 7th Battalion City of London Cap Badge Made from bi-metal and in good condition with slider undamaged and intact. 7th Canadian Railway Troops CEF Scarce Collar Badge (Gaunt). Made by J R Gaunt of London from pickled brass and in good condition with holding lugs undamaged and intact.Measures 28mm high. 7th Dragoon Guards WW1 Cap Badge Made from brass/gilded metal and in good condition with slider undamaged and intact. 7th Duke of Connaughts Own Rajputs Victorian Pagri Badge. Made from bronze and in good condition with stout pin and clasp undamaged and intact. measures 58mm high. 7th Gurkhas Rifles Black Badge Measures 45 x 33 mms. 7th Queen\'s Own Hussars K/C Collar Badge 33 mms H.
A good example. 7th Queen\'s Own Hussars Q/C Collar Badge 33 mms H. 7th Volunteer Battalion The Royal Scots Glengarry Cap Badge. Made from white metal and in good condition with holding lugs undamaged and intact. Measures 60mm high. 7th Volunteer Battalion The Royal Scots Scarce Matching Collar Badges. Made from white metal and in good condition with holding lugs undamaged and intact. Each one measures 25mm high. 8 Large Lord Hastings Silver-plated Livery Buttons A group of 8 large silver-plated livery buttons by
Firmin & Sons Ld. London. 24 mms diameter. 82nd (POW Volunteers) Regiment of Foot Victorian Glengarry Badge. Made from brass and in good condition with brass holding lugs undamaged and intact. Measures 80mm high. 88th (Connaught Rangers) Regiment of Fooot Victorian Glengarry Cap Badge. Made from brass/gilded metal and in good condition with brass holding lugs undamaged and intact. Measures 66mm high. 88th (Victoria Fusiliers) Infantry Battalion CEF Cap Badge Made from gilded metal and in good condition with holding lugs undamaged and intact. Measures 40mm high. 8th (Winnipeg) Infantry Battalion CEF WW1 Collar Badge Made from brass/gilded metal and in good condition with holding lugs undamaged and intact. Measures 30mm across. 8th Kings (Royal Irish) Hussars Brass Collar Badge: . 33 mms H. In gilding metal. 8th Kings (Royal Irish) Hussars Collar Badge: . 33 mms H. 8th Kings (Royal Irish) Hussars Collar Badges. Made from bi-metal and in good condition. 8th Kings (Royal Irish) Hussars Silvered Collar Badge: K.C. Marked \'P\' on the rear. 8th Kings (Royal Irish) Hussars Victorian Cap Badge. Made from bi-metal, has brazing hole and is in good condition with holding lugs undamaged and intact. Measures 42mm high. 8th Kings (Royal Irish) Hussars Victorian Collar Badge.. 29 mms H. 8th Kings Royal Irish Hussars Hallmarked Silver (1901) Victorian Arm Badge. It is made by Fattorini&Sons in 1901 from Silver and is in good condition (some wear) with 3 holding lugs undamaged and intact. It measures 62mm high. 8th King\'s (Royal Irish) Hussars Bi-Metal Victorian Collar Badges. Made from bi-metal and in good condition with holding lugs undamaged and intact. Each one measures 30mm high. 8th Railway Troops Battalion CEF Collar Badge.(Gaunt) Made by J.R.Gaunt from bi-metal and in good condition with holding lugs undamaged and intact. Measures 30mm high. 90th (Winnipeg Rifles) Infantry Battalion CEF WW1 Collar/Sweetheart Badge. Made from bronze or bronzed brass and in good condition with holding lugs undamaged and intact. Measures 36mm high. 94th Regiment of Foot Victorian Glengarry Badge. Made from brass/gilded metal and in good condition with original brass holding lugs undamaged and intact. Measures 78mm high. 96th (Saskatchewan Highlanders) Infantry Bn. Collar Badge. Made from brass or bronzed brass and in good condition with 4 fixing blades undamaged and intact. Measures 36mm high. 9th Bengal Lancer\'s Silver-plated Button 21 mms diameter by Firmin & Co London. 9th Lancers Officers original Service Dress Cap Badge. (4 Blades) Made from bronze and in very good condition with all four fixing blades undamaged and intact. Measures 44mm high. A Group of Mixed 5 Scottish Collar Badges - White Metal Including:
Argyll & Sutherland
Higland L.I.
Royal Scots
Black Watch A Selection of Indian Buttons & Titles Inc\' CHOTA NAGPUR Reg\'t Includes:
3 Chota Nagpur Regimental Buttons - 17 mms diameter.
5 Southern Province Mounted Rifles buttons - 4 x 14 mms diameter - 1 @ 21 mms diameter.
2 SPMR Titles - 1 2 piece, plus the letter \'A\' 13 mms H. Army Cyclist Corps Cap Badge Made from brass/gilded metal and in very good condition with original slider intact. Army Dental Corps O.S. CEF Cap Badge. Made from bronze and in good condition with holding lugs undamaged and intact. Measures 344mm high. Army Service Corps A good voided ASC cap badge. Army Service Corps Officer\'s Q/C Collar Badge By J R Gaunt London.
29 mms H. Baluchistan Volunteer Rifles original Cap Badge. Made from white silvered metal and in good condition (needs clean) with holding lugs undamaged and intact. Measures 40mm high.Possibly Officers. Beaminster & Netherbury Grammar School Clasped Badge 31 mms H. With some losses to the enamel and catch.
By Vaughtons Ld Birmn Berkshire & Westminster Dragoons Anodised - Staybrite Pair of Collar Badges & Cap Badge. Both badge and collars in excellent, almost mint condition.
By J R Gaunt London Black Watch (Royal Highlanders) Officers (circa 1901-36) Glengarry Badge. Made from gilt and white silvered metal and in good condition with holding lugs and backing pin undamaged and intact. Measures 76mm high. Black Watch A Pair of Anodised Collar Badges 25 mms H. Border Regiment Collar Badge 37 mms wide.
Die-stamped gilde metal.
A good example without the word \'CHINA\'. Scarce. Border Regiment Victorian o/r\'s Helmet Plate and Centre. Made from gilded and white metal and in good condition with holding lugs undamaged and intact. Measures 132mm high. Border Security Force Small Indian Badges A pair of nickel BSF small badges with pins.
22 mms H. Buff\'s Royal East Kent Volunteers Collar Badge Die-stamped white metal. Canada: 2nd (British Columbia) Depot Battalion CEF Cap Badge. Made by O.B.Allan from bronze and in good condition with original lugs intact. Measures 48mm high. Sent to Keith Wenman on 18/10/24. Canadian Army Pay Corps CEF Officers Bronze Service Dress Cap Badge. Made from bronze and in good condition with original fixing blades intact. Measures 48mm high. CCB Ceylon Cadet Battalion British Colonial Cap Badge Badge CCB
Nunquam non Paratus written on the scroll, 2 loops to the reverse. Collar Badge: Royal Warwickshire In white metal, die-stamped. A good example.
28 mms x 30 mms. Collar Badge: The Queen\'s Royal Lancers Silvered metal.
30 mms x 30 mms Connaught Rangers Collar Badges. Made from brass/gilded metal and in good condition with original lugs intact.Not exact match. Connaught Rangers Officers (Pre 1923) Service Dress Cap Badge (J&Co.. Made by J&Co. of London (Jennens) from bronze and in good condition with fixing blades undamaged and intact. Measures 44mm high. Connaught Rangers Victorian (2 Piece) Helmet Plate. Made from brass/gilded metal and in good condition with all holding lugs undamaged and intact. Measures 130mm high. Corps of Military Accountants George V Collar Badge 32 mms H.
With some discolouration to the metal.
Die-stamped gilded metal. DAME ALLEN\'S CCF CLOTH SHOULDER TITLE DANIEL STEWARTS & MELVILLE COLLEGE CCF CLOTH SHOULDER TITLE SCOTTISH - Edinburgh Dept. of The General Auditor CEF Officers WW1 Cap Badge (Gaunt Tab). Rare Badge.
Made by Gaunt of London from bronze and white silvered metal and in good condition with holding lugs undamaged and intact. Measures 42mm high. Devonshire Regiment (Pre 1914) Pagri Badge (Long Slider). Made from brass/gilded metal and is in good condition with long slider undamaged and intact. Dorsetshire Regiment (Pre 1914) Helmet Plate Centre&Backing Cloth. Made from brass/gilded metal and in good condition with all 4 holding lugs and backing cloth undamaged and intact. Duke of Cornwalls Light Infantry Officers Waist Belt Clasp. Made from gilt and white silvered metal and in good condition (needs clean).Measures 48mm high by 96mm wide.. Duke of Edinburgh\'s Anodised/Staybrite Collar Badges 25 mms x 25 mms.
In very good condition. Duke of Wellington\'s Reg\'t Collar Badge Duke Of Wellington\'s Regiment (Volunteer Battalion) Pre-1908 White Metal Other Ranks\' collar badge.
30 mms H. East Kent (Pre 1913) Helmet Plate Centre. Made from brass/gilded metal and in good condition with all 4 holding lugs and black backing cloth undamaged and intact. East Lancashire Regiment Officers (1902-14) Helmet Plate. It is made from gilt and white silvered metal and is in very good condition with one holding lug absent. Measures 126mm high. East Lancashire Victorian o/r\'s 2 Piece Helmet Plate. Made from bi-metal and in good condition with all holding lugs undamaged and intact. East Yorkshire (Pre 1913) Helmet Plate Centre. Made from bi-metal and in good condition with all 4 holding lugs and backing cloth undamaged and intact. Fife&Forfar Yeomanry Shoulder Title Made from brass/gilded metal and in good condition with holding lugs undamaged and intact. Measures 38mm across. First Somerset Militia Victorian Glengarry Cap Badge. Made from brass/gilded metal and in good condition (slight service wear)with brass holding lugs undamaged and intact. Measures 68mm high. FRAMLINGHAM COLLEGE CCF CLOTH SHOULDER TITLE Gilt Officer\'s 90th (Perthshire) Regiment of Foot Gilt Button By J W Reynolds London.
18 mms diameter. Gilt Victorian Button. VR Jennens Officer\'s gilt button - VR by Jennens.
24 mms diameter Glamorgan Yeomanry WW1 Cap Badge. Made from bi- metal and in good condition ,has three brazing holes and slider is undamaged and intact. Gloucestershire Anodised/Staybrite Collar Badges 19 mms x 32 mms Gloucestershire Regiment Pouch Badge Gilding metal.
46 mms across. Gold Coast Territorial Forces Cap Badge (Firmin). Made by Firmin of London from bi-metal and in good condition with slider undamaged and intact. GORDON HIGHLANDERS Anodised/Staybrite Pair of Collar Badges GORDON HIGHLANDERS White metal Pair of Collar Badges Grenadier Guards (George V) Long Slider Pagri Badge. Made from brass/gilded metal and in good condition with long slider undamaged and intact. Hallmarked Silver George V Efficiency Decoration - Territorial The Efficiency Decoration, for recipients serving in the Territorial Army of the United Kingdom, came into being in 1930 for award to part-time officers after twenty years of service as an efficient and thoroughly capable officer. London mark \'q\' (1931) made by \'SG\' (Garrards) - Sebastian Henry Garrard.
A fine quality piece. Her Majestys Reserve Regiments (Dragoons) Victorian Cap Badge. Made from brass/gilded metal and in good condition with holding lugs undamaged and intact. Measures 42mm high. Her Majestys Reserve Regiments of Hussars Victorian Cap Badge. Made from brass/gilded metal and in good condition with toned dark holding lugs undamaged and intact. Measures 44mm high. Her Majesty\'s Reserve Regiments (Irish Fusiliers) Cap Badge. Made from bi-metal and in very good condition with holding lugs undamaged and intact. Measures 62mm high. Highland L.I. Anodised/Staybrite Collar Badges In very good condition.
31 mms x 31 mms. Highland Light Infantry Senior NCO\'s Glengarry Badge. Made from gilt and white silvered metal and in good condition with holding lugs and backing cloth undamaged and intact. Measures 52mm high. Highland Light Infantry Victorian Officers Glengarry Badge. Made from gilt and white silvered metal and in good condition with holding lugs undamaged and intact. Measures 52mm high. HILLHEAD HIGH SCHOOL CCF CLOTH SHOULDER TITLE Honorable Artillery Company Bullion Patch 70 mms W x 65 mms H.
Gold coloured thread on black felted fabric. Honourable Artillery Company Anodised - Staybrite Cap Badge. HAC. By Firmin London. The slider is slightly bent. Honourable Artillery Company Shoulder Title 40 mms x 17 mms
A good example. Hull City Police Helmet Plate King\'s Crown Obsolete 10.1 cms
In good condition Hulme/Oldham Hulme 3 CCF CLOTH SHOULDER TITLES 3 Variations HURSPIERPOINT COLLEGE CCF CLOTH SHOULDER TITLE HURSTPIERPOINT COLLEGE CCF CLOTH SHOULDER TITLE INDIA - Royal Deccan Horse Buttons A group of large and small Deccan Horse buttons.
(4 small buttons with service wear).
L 24 mms diameter & S 18 mms diameter India: 101st Grenadiers Bi Metal Pagri Badge (Bhasin, Ludhiana) Madse by Bhasin&Co. of Ludhiana from bi-metal and in good condition with slider undamaged and intact. India: 107th Pioneers Pouch Badge. Made from bi-metal and in good condition with two screwpost fittings undamaged and intact. Measures 66mm high. India: Gilt Victorian Lancer\'s button By Stillwell India: XX1 (21st) Punjabis Part Belt Buckle. Made from white metal and in good condition. Indian Army 48th Cavalry (Indian Armoured Corps) Headress Badge Indian Army 48th Cavalry (Indian Armoured Corps) Headress Badge.
H: 41mm
W: 29mm INDIAN ARMY ORDNANCE CORPS CAP BADGE Made from brass/gilded metal and in good condition with slider undamaged and intact. Indian Gurkha Shoulder Title 9 G Measures 21mms W.
Blackened brass. Indian Officer\'s Shoulder Title 2nd Punjab Measures 37 mm x 18 mm. Indian Shoulder Title 8th Punjab 8th Punjab (8th Punjab Regiment - 1922-1947) India Brass Army metal shoulder title. Showing wear to the front Inniskilling Anodised/Staybrite Collar Badges 21 mms x 25 mms
One of the collars has a slight \'golden\' sheen - (the other is silver collared. Inniskilling Fusiliers brass Collar Badge: 39 mms H. Intelligence Corps WW2 Officers Silvered Cap Badge. Made from white silvered metal and in good condition with pin and clasp undamaged and intact.Measures 45 mms H. Irish Guards Valise Badge. White metal. In good condition.
90 mms H. Irish Rangers Officer\'s Silver & Gilt Collar Badge 30 mms H. IV Queen\'s Own Hussars Officer\'s Collar Badge 33 mms H
A fine example. Kings Dragoon Guards original Officers Service Dress Cap Badge (Gaunt). Made by Gaunt of London from bronze and white silvered metal and in good condition with fixing blades undamaged and intact.Measures 46mm high. Kings Own Scottish Borderers Officers Fretted Glengarry Badge. Made from unmarked silvered metal and in good condition with holding lugs undamaged and intact. Measures 66mm high. King\'s Crown RAF CAP BADGE 45 mms h.
With gilt worn to the front, still intact to the rear.
2 loops to the rear.
good example. King\'s Crown The Suffolk Regiment Cap Badge With brazing holes to the rear.
A good example. King\'s Own Borderers Q.C. Plaid Brooch Chromed and white metal brooch in very good condition.
Marked \'KEV\' to the rear. KING\'S OWN YORKSHIRE LIGHT INFANTRY Cap Badge Made from bi-metal and in good condition with slider undamaged and intact. Labour/Pioneer\'s Corps Silvered K.C. Collar Badge 35 mms H. Marked \'P\' by Firmin London. Lake Superior Scottish Cap Badge. Made from gilded metal and in good condition (some wear) with holding lugs undamaged and intact.Measures 58mm high. Lancashire Fusiliers Fur Cap Grenade. Made from brass/gilded metal and in good condition withholding lugs undamaged and intact. Measures 94mm high. Lancashire Fusiliers Silver & Gilt Collar Badge 37 mms High. LARGE Indian Badge/INSIGNIA. NORTHERN SCOUTS 70 mms H x 10.7 mms W.
A very large, scarce insignia marked \'NORTHERN SCOUTS\'. Large K.C. ARMY CHAPLAIN\'S INSIGNIA 85 mms H.
A scarce and attractive, well constructed insignia of the army chaplain\'s pattern, with a red enamelled centre piece on gilding metal. With a brooched pin to the rear and a loop to the top of the piece. LARGE ROYAL ARTILLERY K.C. SILVER-PLATED ACCOUTREMENT An unusual piece.
24.7 cms - 9 3/4 \" across x 17 cms - 6 3/4\". Large The Royal Scots Gilt Button A very good button by Jennens.
24 mms diameter. Large Victorian Silver Plated Button. 1st B\'n SHROPSHIRE RIFLES VOLUNTEERS \'48\' in the centre of the bugle. by Jennens.
Fine example. Large Victorian Silver-plated Button by Reynolds. VR Early Victorian - 24 mms diameter. LEICESTERSHIRE Cap Badge In fair condition with some wear. LEICESTERSHIRE Collar Badge with scroll 45 mms across. LEICESTERSHIRE YEOMANRY CAVALRY Silver-plated Victorian Button. By Hamburger & Co. 24 mms diameter. Light Infantry Metal Cap Badge 33 mms h.
A good example. LINCOLNSHIRE REG\'T Officer\'s Service Dress Cap Badge (Gaunt Tab) Made by Gaunt of London from bronze and in good condition with fixing blades undamaged and intact. Measures 52mm high. Liverpool Pals Hallmarked Officers Cap Badge (Elkington 1914). Made by Elkington and Company in London in 1914 from Silver and in good condition with holding lugs damaged and intact. Measures 38mm high. Liverpool Pals Officers Hallmarked Silver Cap Badge (1914). Made in London in 1914 by Elkington and Company from Hallmarked Silver and in very good condition. Measures 38mm high. London Irish Volunteers - Shamrock Pouch Badge. 24 mms x 24 mms
With screw fittings to the rear. Machine Gun Corps WW1 Officers Service Dress Cap Badge. Made from bronze and in good condition with fixing blades undamaged and intact. Measures 50mm wide.. MANCHESTER GRAMMAR SCHOOL CCF CLOTH SHOULDER TITLE Middlesex Imperial Yeomanry Officers Cap Badge (Blades). Made from white metal and in very good condition with fixing blades folded back and intact. Measures 36mm wide by x 36mm high. Middlesex Regiment WW2 Cap Badge. Made from bi-metal and in good condition with original slider intact. Morrisons Academy CCF CLOTH SHOULDER TITLE National Motor Volunteers WW1 Officers Service Dress Cap Badge. Made by Gaunt of London from bronze and in good condition with fixing blades undamaged and intact. Measures 38mm high. NEW YORK CITY Obsolete Police Badge - 124 Patrol Made by N Stafford 66 Fulton St, NY.
A superb example of this scarce badge Norfolk Collar Badge 28 mms H
Gilt die-stamped example Norfolk Regiment (Pre 1913) Helmet Plate Centre. Made from bi-metal and in good condition with all 4 holding lugs and backing cloth undamaged and intact. Norfolk Yeomanry GVR Smaller Sized Cap Badge Made from brass/gildedmetal and in good condition with original slider. NORTH IRISH HORSE K.C.BRONZE OSD Collar Badge: 33 mms W x 35 mms H. North Irish Horse Officer\'s Collar Badge: Silvered Q.C. North Irish Horse collar badge.
33 mms W x 35 mms H. NORTH IRISH HORSE SEALED MOD APPROVED North Irish Horse - 1st example approved by the MOD - anodised aluminium by FIRMIN. With red wax seal to the rear.
Pattern number 19404 Northamptonshire Sweetheart Brooch In gilded metal.
25 mms W x 30 mms H Northamptonshire Yeomanry Collar Badge 33 mms H Notts & Derby Cap Badge A good example with a king\'s crown. O.R.\'s The King\'s Own Cap Badge. Post 1902. 54 mms W x 31 mms H
A lovely example, with some service wear. Obsolete American Fire Dep\'t Badge. City of New York F.D N.Y No. 8981
Marked on paper to the rear:
\'Fireman \"Tim Kilarney\" Original Badge\'
Superb example Obsolete American Police Badge. City of New York No 106 Obsolete American Police Badge. City of New York City of New York Police Badge. Number 20137.
Fine example. Obsolete American Police Badge. City of New York RAILROAD NEW YORK CENTRAL SYSTEM A fine example of a scarce badge for the N.Y.C.R.R.C.O. - New York Central System - No 987. Obsolete American Police Badge. New York Niagara Frontier State Parks Police No.3. Written on the back \"Dept NY Disbanded\". Obsolete Chief DUBLIN N.C. American Police Badge. Chief Dublin Police. N.C.
State of North Carolina.
In very good condition. Officer\'s Duke of Wellington\'s West Riding Collar Badge Duke of Wellington\'s (West Riding) Regiment Officer \'s silver plated and gilt collar badge. Worn by officers on the shell jacket and scarlet frock from 1883. A very good example. Officer\'s silver plate & Gilt KING\'S REG\'T Collar Badge In very good condition.
35 mms H.
By LB & B Officer\'s South Wales Borderers Collar Badge Officer\'s Service Dress Collar Badge.
38 mms H. On War Service Gilt&Enamel Lapel Badge (48481). Made by J.R.Gaunt of Londonfrom gilt and enamels, marked 48481 and in good condition with button hole fitting undamaged and intact. ON WAR SERVICE LAPEL BADGE Stamped in relief \"Woolley & Co.(Birm) Ltd.\" \"X.
Munition Workers badge.
Number: 12888 On War Service Lapel Badge 1915 By J R Gaunt in raised relief.
\'M\' Number: 19597 OSD Collar Badge. ROYAL WELSH FUSILIERS 56 mms H. OSD Pair of Collar Badges. KSLI A pair of King\'s Shropshire Light Infantry officer\'s service dress bronze collar badge. Very good examples Oudh & Cawnpore Horse very scarce Victorian Cast Silver Plated Officers Pagri Badge. Made from white silvered plated metal and in good condition with pin and clasp undamaged and intact. Measures 48mm high by 54mm wide. Pair of Collar Badges: Middlesex Regiment 33 mms x 30 mms Pair of East Lancashire Collar Badges. Gilding metal. Pair of Royal Tank Corps WW1 Pattern Collar Badges Smaller size. 30 mms x 23 mms Pioneers Battalion CEF WW1 Collar Badge. (O B Allan) Made from bronze or bronzed brass and in good condition with holding lugs undamaged and intact. Measures 32mm high. PORTORA CCF CLOTH SHOULDER TITLE Scarce Northern Irish Title Princess Patricia\'s Canadian Regiment Officer\'s Collar Badge Silvered and gilt. A fine example.
37 mms W x 29 mms H Princess Victoria (Royal Irish Fusiliers) Edwardian (1902-05) Brodrick Cap Badge. Made from bi-metal and in good condition with two brazing holes and slider undamaged and intact. Queen Mary\'s Own 18th Hussars Cap Badge. Made from white metal and in good condition with slider undamaged and intact. Queens County Rifles Victorian Glangarry Badge. Made from bronzed or blackened brass and in good condition with toned dark n/s holding lugs undamaged and intact. Measures 62mm high. Railway Construction Corps CEF WW1 Collar Badge. Made from bronze or bronzed brass and in good condition (slight tarnish front and rear) with holding lugs undamaged and intact. Measures 28mm high. Rangoon Battalion A.F.I. Highland Company Pagri Badge. Made from white silvered plated metal and is in good condition with stout pin and clasp undamaged and intact. Measures 58mm high by 68mm wide. ROXBURGH RIFLES BADGE & Hall Marked Silver Accoutrements on Original Leather Belt & Pouch Bag Superb Item.
Underneath the pouch bag there is an original label marked 'C.S.Smith & Son 12 Piccadilly, Gold Lacemen to Their Majesties'. On the front of the pouch bag there is a silver Victorian Crown and silver accompanying L.I. silver badge. On the belt is attached a hall marked Birmingham whistle, dated 1859 ( 'K' ), together with an excellent Lion roundel and of course the Silver 4th Roxburgh Rifles Badge. Further photographs can be supplied. Royal Armoured Corps CAP BADGE. 1st Pattern A very good example of this badge with a slider support to rear (top). Royal Army Dental Officer\'s silver & Gilt Collar Badge 34 mms H. Royal Army Ordnance Corps WW2 Plastic Economy Cap Badge Made from plastic and in good condition with fixing blades undamaged and intact. Measures 50mm high. Royal Army Service Corps Officer\'s Collar Badge. George V 32 mms H. In Gilt and enamel. Very good example. Royal Army Service Corps WW2 Plastic Economy Cap Badge Made by A.Stanley of Walsall from plastic and in good condition with fixing blades undamaged and intact. Measures 40mm high. Royal Army Veterinary OSD (Officer\'s) Collar Badge 38 mms H.
Bronze. ROYAL ARTILLERY CANADA Officer\'s Service Dress Cap Badge. Made from bronze and in good condition with fixing blades undamaged and intact. Royal Artillery Corps Officers Gilt Cap&Collars Set. Made from gilt (Gaunt) and are all in in very good condition with gilt holding lugs undamaged and intact. Royal Australian Electrical&Mechanical Engineers Cap Badge (Luke). Made by Luke of Melbourne from bi- metal and in good condition with holding lugs undamaged and intact. Measures 46mm high. Royal Berkshire Collar Badge, White Metal 33 mms across. Royal Devonshire Yeomanry Cap Badge Made from brass/gilded metal and in good condition with slider undamaged and intact. Royal Dublin Fusiliers (Pre 1922) Fur Cap Grenade. Made from brass/gilded metal and in good condition with holding lugs undamaged and intact. Measures 94mm high. Royal Dublin Fusiliers Brass Collar Badge: 39 mms H. Royal East Kent Yeomanry Cap Badge Made from brass/gilded metal and in good condition with slider undamaged and intact. Royal Engineers Cap Badges A good non-voided example. Royal Flying Corps Officer\'s Service Dress Cap Badge. Marked J & Co (Jennens) to the rear. Made before 1923 from bronze or bronzed brass and in good condition with fixing blades undamaged and intact. Royal Fusiliers Cap Badge. King\'s Crown 53 mms x 39 mms
A good example. Royal Inniskilling (Pre 1926) original Cap Badge. Made from bi-metal and in good condition, has three brazing holes and slider is undamaged and intact. Royal Inniskilling Fusiliers Collar Badge 40 mms H. With 2 lugs Royal Inniskilling Fusiliers Pair of Officers Large Bullion Badges. Made from gilded threads and white silvered metal and in good condition (both fragile around where flame joins Grenade and need strengthening).Each one measures 66mm high. Royal Irish Fusiliers (Post 1881) Victorian Officers Fur Cap Grenade (Blades). Made from gilt and white silvered metal and in good condition with double fixing blades undamaged and intact. Measures 96mm high. Royal Irish Fusiliers Cap Badge A very good 2 piece example. Royal Irish Fusiliers Victorian Officers Waist Belt Clasp . Made from gilt and white silvered metal and in good condition with holding lugs undamaged and intact, has matching benchmarks. Measures 48mm high. Royal Irish Plume Holder and Large Q.C. Silver-plated Badge Badge - 78 mms h.
Feathers in good condition.
Fine example. ROYAL IRISH RANGERS Silver & Gilt Officer\'s Collar Badge Fine example.
32 mms H. Royal Irish Rifles Victorian Cap Badge. Made from brass/gilded metal and in good condition with pinched holding lugs intact. Measures 40mm high. Royal Medical Corps Officer\'s Collar Badge Silver & Gilt - fine example.
46 mms H. Royal Munster Fusiliers Victorian (circa 1881-96) Officers Glengarry Grenade. Made from gilt and white silvered metal and in good condition with holding lugs undamaged and intact. Measures 70mm high. Royal Scots Anodised/Staybrite collar badges 35 mms W Royal Scots Dragoon Guards Badge Made from bi-metal and in good condition with 3 holding lugs undamaged and intact. Measures 46mm high. ROYAL SCOTS FUSILIERS Collar Badge 39 mms H.
With some wear. Royal Scots Fusiliers Victorian Officers Pouch Badge. Made from gilt (slightly worn) and in good condition with screwpost fittings, nuts and washers undamaged and intact. Measures 102mm high. Royal Scots Greys, 2nd Dragoon Guards Collar Badge A very good example. 32 mms high. Royal Scots SILVER & GILT Officers Collar Badge 29 mms H. Marked SILVER to the rear.
A high quality example. Royal Signal Corps WW2 Plastic Economy Cap Badge.Cap Badge Made from plastic and in good condition with fixing blades undamaged and intact. Measures 48mm high. Royal Sussex Regiment White metal Collar Badge: 32 mms H. ROYAL SUSSEX REG\'T Victorian Pair of Collar Badges. Die stamped gilded metal pair of collar badges worn post 1881 by The Royal Sussex Regiment. Some wear to the front. Royal Ulster Rifles Officers Hallmarked Silver Pouch Badge (1932 Gaunt).. Made in 1932 in Birmingham fromSilver and retailed by J.R.Gaunt and Sons. It is in very good condition with hallmarked nuts and washers undamaged and intact. Measures 48mm high. Royal Welsh Fusiliers WW1 Brass Economy Cap Badge. Made from brass/gilded metal and in good condition with holding lugs undamaged and intact. Royal West African Frontier Force Anodised/Staybrite Cap Badge Anodised Badge with a metal slider. 46 mms H. Scots Guards NCO\'s Cap Badge. Made from gilt and white silvered metal (both faded) and in good condition with holding lugs undamaged and intact. Scots Guards Silver Hallmarked Collar Badge 24 mms x 24 mms.
Silver hall marked Lion \'W\' (probably Edinburgh, but the city mark is occluded by the secure silver wire). Scots Guards Warrant Officers Silver Cap Badge. In good condition with holding lugs intact. Marked \'SILVER\', measures 50mm high. Scottish Horse Yeomanry w/m Cap Badge Made from white metal and in good condition with holding lugs undamaged and intact. Measures 46mm high. Seaforth Highlanders 2 Piece Collar Badges. Made from brass/gilded metal and in good condition with all holding lugs undamaged and intact. Sherwood Foresters Collar Badges. In good condition. SHROPSHIRE Light Infantry Metal Shoulder Title 50 mms X 10 mms Shropshire Yeomanry Officer\'s Collar Badge Fine example.
33 H. Small Gilt Button: 16 mms diameter.
By Firmin & Sons London. South Middlesex Rifle Volunteers Cap Badge. Made from white metal and in good condition with holding lugs undamaged and intact. Measures 42mm high x 56mm wide. South Wales Borderers Cloth Shoulder Title 142 mms W x 16 mms H
A good original title South Wales Borderers original Scarce Victorian Officers Gilt&Silver Forage Cap Badge. Made from gilt and white silvered metal and in good condition with holding lugs undamaged and intact. Measures 64mm high. South Wales Borderers Victorian/Edwardian Cap Badge. Made from bi-metal and in good condition with brazing hole and holding lugs undamaged and intact. Measures 42mm high. Surrey Yeomanry (Post 1953) w/m Cap Badge. Made from white metal and in good condition with slider undamaged and intact Surrey Yeomanry Larger Sized Cap Badge Made from brass/gilded metal and in good condition with holding lugs undamaged and intact. Measures 50mm high. Swedish Tre Kronor Brooch - Gilt and Blue enamel A charming Swedish Gilt and blue enamel brooch, made by Sporrung. T/1/Grenade/RF/CITYofLONDDON 1 piece Shoulder Title. Made from brass/gilded metal and in good condition with holding lugs undamaged and intact. T/3/Grenade/RF/CITYofLONDON One Piece Shoulder Title. Made from brass/gilded metal and in good condition with holding lugs and custom built backing plate undamaged and intact. Measures 88mm high. T/4/Grenade/RF/CITYofLONDON One Piece Shoulder Title. Made from brass/gilded metal and in good condition with holding lugs undamaged and intact. Measures 85mm high. Tank Corps (Pre 1923) Officers Service Dress Cap Badge (J&Co.) Made before 1923 by J&Co. (Jennens) from bronze and in good condition with fixing blades undamaged and intact. Measures 48mm high. The 1st (King\'s Own) Dragoon Guards NCO\'s Arm Badge Third Pattern. Made from white metal and in good condition with holding lugs undamaged and intact. Measures 48mm high. THE BORDER REGIMENT Pair of Collar Badges. Some differences to the pair. The Cameronians Glengarry Cap Badge. Made from white metal and in good condition with holding lugs undamaged and intact. Measures 66mm high by 78mm wide. The Devonshire Regiment Victorian Cap Badge Made from bi-metal and in good condition with 2 brazing holes and holding lugs undamaged. Measures 42mm high. The Dogra Regiment Cap Badge (Samadan Bros). Made by Samadan Brothers of Ludhiana from white metal and in good condition with slider intact. The Lancashire Fusiliers Cap Badge 53 mms x 44 mms.
A good example. The Leinster Regiment Excellent example, made from bi-metal and in good condition with brazing holes to the rear and holding lugs undamaged. The Madras Regiment Cap Badge The Norfolk Regiment WW1 Cap Badge Made from bi-metal and in good condition with holding lugs undamaged and intact. With brazing holes to the rear scroll. The Queens Bays (2nd Dragoon Guards) Cap Badge Made from brass/gilded metal and in good condition with slider and reinforcement bar intact.Excellent example. The Queen\'s West Surrey Regiment Collar Badge: The Queen\'s Regiment with darkened lugs and brazing holes. 38 mms wide. The Royal Irish Fusiliers Collar Badge 48 mms H. With crown.
A good example The Royal Irish Regiment early Matching Collar Badges. Made from brass/gilded metal and in good condition with holding lugs undamaged and intact. The Scottish Horse Collar Badge: 38 mms H. The Suffolk Regiment Victorian Officere Waist Belt Clasp. Made from gilded and silvered metals and in good condition. The Welch Regiment (Post 1920) Officers Service Dress Cap Badge (Firmin). Made by Firmin of London from bronze and in good condition with fixing blades undamaged and intact. The Welch Regiment Hand-Sewn Bullion Badge 85 mms at its widest point.
A good, original piece. The Welsh Regiment Edwardian Cap Badge Made from bi-metal and in good condition with slider undamaged and intact. Ulster Defence Regiment Dress Belt Queen\'s crown badge on chromed clasp.
In good condition. Victorian Gilt Button. The Devonshire Regiment - Jennens Large gilt button. 25 mms diameter. By Jennens War Munition Volunteer Button Hole Badge. Made by by J R Gaunt & Son Ltd from brass/gilded metal and in good condition with fixing hoop undamaged and intact. Measures 44mm high.
No.2049
Warranted Fire Gilt. Warwickshire Yeomanry Collar Badge: 28 mms H. Welbeck College CCF CLOTH SHOULDER TITLE & BADGES Cloth Shoulder Title, patch, anodised cap badge and a pair of metal collars. Welsh Horse OSD Cap Badge Fine bronze example. WELSH REGIMENT Collar Badge: White metal collar badge. A good die stamped example.
37 mms across. West India Regiment Post 1881 Officers Pagri Badge. Made from gilt, enamel and white silvered metal and in good condition withholding lugs undamaged and intact. Measures 42mm high. Westmoreland Yeomanry Cavalry Square Silvered Button Made by Jennens & co London.
19 mms x 19 mms. Women\'s Army Auxillary Corps Cap Badge (G68). By J R Gaunt London.
Numbered \'G 68\' -
Created in 1917. XII (12th) Royal Lancers Victorian Cap Badge. Made from bi-metal, has central brazing hole (covered) and toned dark holding lugs undamaged and intact. Measures 42mm high. Yorkshire Dragoons Yeomanry Cap Badge Made from blackened brass/gilded metal and in good condition with holding lugs undamaged and intact. Yorkshire Hussars Yeomanry bi/m Cap Badge. Made from bi-metal and in good condition with slider and reinforcement bar undamaged and intact. Yorkshire Regiment original (Pre 1908) Cap Badge. Made from bi-metal and in good condition, has three brazing holes and holding lugs undamaged and intact. Measures 42mm high. |